Softell DKG 100N NATURAL is a 10% glass filled, thermoplastic polyolefin elastomer compound for injection molding. It is typically used for automotive interior applications that require low gloss, soft touch, high rigidity, good impact and scratch and mar resistance.
Softell DKG 100N NATURAL
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C) | 0.96 kg/m³ |
| Flexural Modulus (23 °C) | 1750 MPa |
| Tensile Stress at Yield (23 °C) | 28 MPa |
| Tensile Strain at Yield (23 °C) | 10 % |
| Notched Izod Impact Strength (23 °C) | 30 kJ/m² |
| Notched Izod Impact Strength (-30 °C) | 10 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 140 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Interior Automotive Applications, Soft Touch Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications