Sequel 1440 FP GREY AU engineered polyolefin material is typically used for large automotive exterior applications that require ductile impact properties at low temperatures, excellent paintability, and processability.
Sequel 1440 FP GREY AU
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 22 g/10 min |
| Density (23 °C) | 0.94 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 1400 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 22 MPa |
| Notched Izod Impact Strength (23 °C) | 28 kJ/m² |
| Mold Shrinkage |
Process
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications