Sequel 1440 FP GREY AC2 engineered polyolefin material is typically used for large automotive exterior applications that require very good impact properties at low temperatures, excellent paintability, and processability.
Sequel 1440 FP GREY AC2
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C, Method A) | 0.96 g/cm³ |
| Flexural Modulus (23 °C) | 1250 MPa |
| Tensile Stress at Yield (23 °C) | 22 MPa |
| Notched Izod Impact Strength (-40 °C) | 4.8 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications