Purell PE 1810E is a low density polyethylene with good flexibility and delivered in pellet form. The grade is used by our customers for small blow mouldings and injection moulding in healthcare market as well as for tube applications.
Purell PE 1810E
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.4 g/10 min |
| Density | 0.920 g/cm³ |
| Tensile Modulus | 200 MPa |
| Tensile Stress at Yield | 9 MPa |
| Shore Hardness (Shore D) | 45 |
| Vicat Softening Temperature (A/50) | 92 °C |
| Peak Melting Point | 108 °C |
Process
Blow, Fill, & Seal, Blown Film, Extrusion Blow Molding, Injection Blow Molding, Injection Molding
Resin
Low Density Polyethylene
Applications
Blow-Fill-Seal Applications, Bottles and Vials, Caps & Closures (Healthcare), Collapsible Tubes (Healthcare), Healthcare Applications, Medical Devices, Medical Film