Purell HP570P is a polypropylene homopolymer for use in injection molding applications
Purell HP570P exhibits a good flow properties combined with a high stiffness.
Purell HP570P is extensively applied in medical device components, labware and closures. Additionally it is used in general injection molding thin-walled warpage-critical applications.
All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.
Purell HP570P
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 16 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Tensile Modulus | 1400 MPa |
| Tensile Stress at Yield | 33 MPa |
| Tensile Strain at Break | >50 % |
| Tensile Strain at Yield | 11 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 3.0 kJ/m² |
| Ball Indentation Hardness (H 358/30) | 74 MPa |
| Vicat Softening Temperature (A50) | 154 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 85 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene, Homopolymer
Applications
Diagnostic Applications, Healthcare Applications, Labware, Syringes