Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Distributor or your local Lyondellbasell contact.
Purell EP274P is a nucleated polypropylene impact copolymer suitable for use in injection molding applications.
Purell EP274P exhibits an excellent balance of stiffness and low – temperature toughness.
Purell EP274P is typically used in injection molding applications to produce medical products where high mechanical properties are required.
Purell EP274P
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 15 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Tensile Modulus | 950 MPa |
| Tensile Stress at Yield | 20 MPa |
| Tensile Strain at Break | >50 % |
| Tensile Strain at Yield | 7 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 13 kJ/m² |
| Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) | 8 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) | 5 kJ/m² |
| Ball Indentation Hardness (H 358/30) | 45 MPa |
| Vicat Softening Temperature (A50) | 142 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 78 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
Healthcare Applications, Medical Devices