Moplen EP5079 is a fractional melt flow heterophasic copolymer with very low gel and low odor, good stiffness impact balance, and good heat resistance. Typical customer applications are multilayer packaging, high heat resistance thermoforming tray, blow molding for cosmetic and detergent bottles, extrusion sheets with high gloss.
Moplen EP5079
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 0.5 g/10 min |
| Density | 0.90 g/cm³ |
| Flexural Modulus | 1700 MPa |
| Tensile Strength at Yield | 34 MPa |
| Tensile Elongation at Yield | 11 % |
| Notched Izod Impact Strength (23 °C) | No Break J/m |
| Rockwell Hardness (R-Scale) | 100 |
| Vicat Softening Point | 150 °C |
| Deflection Temperature Under Load (0.46 N/mm²) | 120 °C |
Technical Data Sheet
Technical Data Sheet - ASTMProcess
Extrusion Blow Molding, Thermoforming
Resin
Polypropylene, Impact Copolymer
Applications
Bottles For Consumer Goods, General Sheet Extrusion, Opaque Containers, Thermoformed Food Containers