Moplen EP310M HP is a heterophasic copolymer, used in film applications for lamination on other substrates where high impact at room and low temperatures is needed. Moreover EP310M HP features a good stiffness.
This new grade is produced using a non-phthalate catalyst system favored by customers in applications intended for food contact. The film viscosity achieved with Moplen EP310M HP offers good processability on cast lines. This polypropylene heterophasic copolymer exhibits high impact, good puncture, good tear resistance, high seal strength and seal integrity.
Moplen EP310M HP
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 7.5 g/10 min |
| Density | 0.90 g/cm³ |
| Tensile Modulus | 1050 MPa |
| Tensile Stress at Break | 16.7 MPa |
| Tensile Stress at Yield | 21 MPa |
| Tensile Strain at Break | 36 % |
| Tensile Strain at Yield | 6 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 45 kJ/m² |
| Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) | 9 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) | 7 kJ/m² |
| Ductile/Brittle Transition Temperature | -55 °C |
| Ball Indentation Hardness | 46 MPa |
| Vicat Softening Temperature (A50) | 144 °C |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80 °C |
Technical Data Sheet
Technical Data SheetProcess
Cast Film
Resin
Polypropylene, Impact Copolymer
Applications
Bags & Pouches, Food Packaging Film, Impact Modification, Lamination Film, Surface Protection Film