Lupolen 1800 H is a low density polyethylene resin used in a wide range of processing methods such as injection molding, blow molding and film extrusion. It exhibits very good softness and toughness and good dimensional stability. Lupolen 1800 H is delivered in pellet form and is not additivated. Typical customer applications include caps & closures, lids, foams and champagne corks.
Lupolen 1800 H is not intended for use in medical and pharmaceutical applications.
Lupolen 1800H
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 1.5 g/10 min |
| Density | 0.919 g/cm³ |
| Tensile Modulus | 200 MPa |
| Tensile Stress at Yield | 9 MPa |
| Environmental Stress Crack Resistance F₅₀ | 5 hr |
| Shore Hardness (Shore D) | 45 |
| Ball Indentation Hardness (H 49/30) | 15 MPa |
| Vicat Softening Temperature (A/50) | 91 °C |
| Peak Melting Point | 108 °C |
| Melt Temperature | 180 - 230 °C |
Technical Data Sheet
Technical Data SheetProcess
Blown Film, Extrusion Blow Molding, Injection Molding
Resin
Low Density Polyethylene
Applications
Bottles For Consumer Goods, Caps & Closures, Sports, Leisure & Toys