Icorene 1314 is a high performance hexene high density polyethylene specifically developed for use in rotational moulding. This grade has been designed for applications requiring good stiffness and toughness. This material can be used in many different rotomoulding applications and for food contact applications. Icorene 1314 Black 9001 is TÜV approved, protocolnr 175XS0122-00. Icorene 1314 Natural and Black are DiBt approved Z40-25-519 and WRAS approved: 1507503 & 1202543
ICORENE 1314 BUE 5748
Description
Availability
Europe, Latin America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 3.0 g/10 min |
| Density | 0.939 g/cm³ |
| Environmental Stress Crack Resistance (Condition B, F50, 10% Igepal, 50 °C) | >300 hr |
| Environmental Stress Crack Resistance (Condition B, F50, 100% Igepal, 50 °C) | >1000 hr |
| Tensile Strength at Yield (23 °C, Type I) | 20.0 MPa |
| Flexural Modulus (23 °C) | 800 MPa |
| Tensile Elongation at Break (23 °C) | >1000 % |
| Drop Impact Resistance (-40 °C, Rotomoulding) | >210 J/cm |
| Drop Impact Resistance (-20 °C, Rotomoulding, Internal Method) | >200 J/cm |
| Durometer Hardness (Shore D) | 62 |
| Vicat Softening Temperature (A (10N)) | 117 °C |
| Deflection Temperature Under Load Unannealed (0.45 MPa) | 67 °C |
| Melting Temperature | 127 °C |
Technical Data Sheet
Technical Data Sheet - APSProcess
Rotomolding
Resin
High Density Polyethylene
Applications
Fuel Tanks, Septic Tanks, Tanks, Tanks, Industrial