Icorene 1041 is a linear low density polyethylene specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.
Icorene 1041 is a linear low density polyethylene specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.
Europe
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Melt Flow Rate (190 °C/2.16 kg) | 4.4 g/10 min |
Density | 0.932 g/cm³ |
Tensile Elongation at Yield | 28 % |
Tensile Strength at Yield | 17 MPa |
Tensile Strength at Break | 20 MPa |
Flexural Modulus | 490 MPa |
Tensile Elongation at Break | 1300 % |
Drop Impact Resistance (-20 °C, Internal Method) | 180 J/cm |
Drop Impact Resistance (23 °C, Internal Method) | 140 J/cm |
Drop Impact Resistance (-40 °C, Internal Method) | 190 J/cm |
Rotomolding
Linear Low Density Polyethylene
Agricultural Tanks, Containers, General Purpose