Hostacom TKC 406P NAT is a mineral filled elastomer modified PP with medium melt flow rate. It combines excellent stiffness / impact balance, good scratch resistance and high UV stability with good flowability and high dimensional stability.
Hostacom TKC 406P NAT
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 12 g/10 min |
| Density (23 °C) | 1.07 g/cm³ |
| Tensile Modulus (23 °C) | 2000 MPa |
| Tensile Stress at Yield (23 °C) | 22 MPa |
| Tensile Strain at Yield (23 °C) | 5.5 % |
| Charpy Impact Strength - Notched (23 °C) | 16 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C) | 2.5 kJ/m² |
| Vicat Softening Temperature (B50) | 50 °C |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 55 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Outdoor and Power Tools
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications