CirculenRenew C14 LD2420 K is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).
CirculenRenew C14 LD2420 K is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.
CirculenRenew C14 LD2420 K is a non-additivated, low density polyethylene. It is characterized by a good processability. Films made from CirculenRenew C14 LD2420 K exhibit good optical properties. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
CirculenRenew C14 LD2420K
Description
Availability
Africa-Middle East, Asia-Pacific, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 4.0 g/10 min |
| Density | 0.924 g/cm³ |
| Tensile Modulus | 260 MPa |
| Tensile Stress at Yield | 11 MPa |
| Dart Drop Impact Strength, F50 | 100 g |
| Tensile Strength MD | 22 MPa |
| Tensile Strength TD | 17 MPa |
| Tensile Strain at Break MD | 300 % |
| Tensile Strain at Break TD | 600 % |
| Coefficient of Friction | >0.7 |
| Failure Energy | 3.5 J/mm |
| Vicat Softening Temperature (A/50) | 92 °C |
| Peak Melting Point | 111 °C |
| Haze (50 µm) | <8 % |
| Gloss (20°) | >60 |
| Gloss (60°) | >105 |
Technical Data Sheet
Technical Data SheetProcess
Blown Film, Cast Film, Extrusion Coating, Injection Molding
Resin
Low Density Polyethylene
Applications
Coatings, Protective, Food Packaging Film, Hygiene Film, Shrink Film, Surface Protection Film