CirculenRecover PP189P Grey is a circular polypropylene copolymer supplied in pellet form for injection moulding applications. The grade combines stiffness, high impact and flow. The grade is available in grey color sorted from municipal plastic waste.
Sustainability
According with the requirements of Standard ISO 14021:2016, CirculenRecover PP189P Grey contains at least 85 % of recycled material that is fully based on Post-Consumer Waste (PCW) from pre-sorted municipal plastic waste. Filtration level is 150 µm. Volatiles according to ASTM D6980 @ 120 °C are < 0.2%.
This product is not intended for highly regulated applications including food contact, potable water contact, medical and pharmaceutical applications.
CirculenRecover PP189P Grey
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 15 g/10 min |
| Density | 0.918 g/cm³ |
| Bulk Density | 0.560 g/cm³ |
| Tensile Modulus (23 °C) | 800 MPa |
| Tensile Strength (23 °C) | 19 MPa |
| Tensile Strain at Break (23 °C) | 50 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | >30 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) | >7 kJ/m² |
| Ash | < 2 wt % |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
Containers, Crates, Furniture, Pails