CirculenRecover HD45U06 Natural is a circular polymer supplied in pellet form for industrial packaging applications.
Sustainability:
According with the requirements of Standard ISO 14021:2016, CirculenRecover HD45U06 Natural contains at least 40% of post-consumer HDPE from pre-sorted plastic packaging waste. The source of the post-consumer HDPE is based on re-collected industrial packaging applications.
This product is not intended for highly regulated applications including food contact, potable water contact, medical and pharmaceutical applications. It is intended to be used for regulated applications as e.g., for UN approved industrial packaging.
CirculenRecover HD45U06 Natural
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/21.6 kg) | 6.0 g/10 min |
| Melt Flow Rate (190 °C/21.6 kg) | 6.0 g/10 min |
| Density | 0.945 g/cm³ |
| Density (23 °C) | 0.945 g/cm³ |
| Bulk Density | >0.500 g/cm³ |
| Flexural Modulus | 1100 MPa |
| Tensile Modulus | 850 MPa |
| Tensile Stress at Yield | 24 MPa |
| Tensile Strain at Yield | 10 % |
| Environmental Stress Crack Resistance F₁₀ (10% Igepal®, Cond B) | 1000 hr |
| FNCT (3.5 MPa, 2% Arkopal N100, 80 °C) | 80 hr |
| Tensile Impact Strength | 150 kJ/m² |
| Vicat Softening Temperature (A/50) | 125 °C |
| Oxidation Induction Time (200 °C) | 50 min |
| Peak Melting Point | 131 °C |
| Melt Temperature | 180 - 240 °C |
Technical Data Sheet
Technical Data SheetProcess
Extrusion Blow Molding
Resin
High Density Polyethylene