Alathon L5876 is selected by customers for use in injection blow molding and extrusion blow molding applications where higher gloss than standard HDPE grades is required.
Alathon L5876
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.74 g/10 min |
| Density (23 °C) | >=0.956 g/cm³ |
| Flexural Modulus (1% Secant) | 195000 psi |
| Tensile Strength at Yield | 4100 psi |
| Tensile Elongation at Break | >500 % |
| Tensile Impact Strength | 160 ft-lb/in² |
| Shore Hardness (Shore D) | 66 |
| Vicat Softening Temperature | 129 °C |
| Low Temperature Brittleness F₅₀ | <-76 °C |
| Deflection Temperature Under Load (66 psi, Unannealed) | 76 °C |
Technical Data Sheet
Technical Data SheetProcess
Extrusion Blow Molding
Resin
High Density Polyethylene
Applications
Bottles For Consumer Goods