Adstif HA801U very high melt flow, nucleated polypropylene homopolymer is available in pellet form. This resin is typically used in high-speed injection molding of thin-walled parts, and as a building block for compounded applications that require high flow and high stiffness.
Adstif HA801U
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 65 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) | 290000 psi |
| Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) | 2000 MPa |
| Tensile Strength at Yield (2 in/min) | 6100 psi |
| Tensile Strength at Yield (50 mm/min) | 42 MPa |
| Tensile Elongation at Yield | 6 % |
| Notched Izod Impact Strength (73 °F, Method A) | 0.3 ft-lb/in |
| Notched Izod Impact Strength (23 °C, Method A) | 16 J/m |
| Deflection Temperature Under Load (66 psi, Unannealed) | 270 °F |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 132 °C |
Technical Data Sheet
Technical Data Sheet - ASTMProcess
Compounding, Injection Molding
Resin
Polypropylene, Homopolymer
Applications
Colour Concentrates, Polymer Modifier, TWIM Food Containers