Adflex C 200 F is developed for the central layer of tough, transparent co-extruded cast-film structures. It combines transparency with high softness , a very high toughness even at low temperatures and an excellent compatibility with other polyolefins. It does not contain any slip nor anti-blocking agents. Typical applications of the Adflex C 200 F are co-extruded cast-film for food packaging, hygiene applications, surface protection where the outside layer can be any polyolefin homo or copolymer.
Adflex C 200 F
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 6 g/10 min |
| Density (23 °C, Method A) | 0.89 g/cm³ |
| Tensile Modulus (23 °C) | 200 MPa |
| Tensile Stress at Break | 15 MPa |
| Tensile Strain at Break | 600 % |
| Charpy Impact Strength - Notched (-20 °C) | 30 kJ/m² |
| Charpy Impact Strength - Notched (-40 °C) | 2 kJ/m² |
| Shore Hardness (Shore D, 15 sec) | 40 |
| Vicat Softening Temperature (A50) | 80 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 41 °C |
| DSC Melting Point | 142 °C |
Technical Data Sheet
Technical Data SheetProcess
Blown Film, Cast Film, Extrusion Blow Molding, Extrusion Coating, Injection Molding, Thermoforming
Resin
Catalloy
Applications
Bags & Pouches, Barrier Film, Breathable Film, Film Wrap, Food Packaging Film, Lamination Film, Peelable Film, Stationery Film